With a 4.0 TFT LCD and unique diagnostic software, it features. Full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850etc.Itenables technicians to accurately diagnose complex problems. Based on LR II, more functions are added to LR V2.0. ICarsoft LR V2.0 scanners just work on LandRover/Jaguar with OBD II protocol. If you want to test some specific functions, please kindly confirm with us, thank you!
ICarsoft LR V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc. Applies to the single Brand of most models of LR which equipped with OBDII-16 DLC.
Support OBDII/EOBD Ten Modes of Operation. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
DTC Library to lookup when user is operating this tool. Easy To Use With Silicone Keys.Full Speed Upgrade Via USB2.0. English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish. Swedish, Finnish, Portuguese, Russian, Danish, Norwegian. Varies across year and model. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively. The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU. Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel.
Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned.
The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly. If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated.
The iCarsoft LR V2.0 will allow you to carry out steering angle re-calibration on supported models. Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Power Consumption: 1.8W(Typical). 206104.132.6 mm (L x W x H). LR V2.0 vehicle coverage of LandRover/Jaguar. (If your vehicles are before 2004 year, please make sure your vehicles are OBDII compliant firstly). LR V2.0 Main Unit.This item is in the category "Vehicle Parts & Accessories\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "tencomms" and is located in this country: AU. This item can be shipped worldwide.